-
A two component, heat cure epoxy system specifically developed for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling endurance. Product meets UL 94-HB flammability requirements. CLC 15-150 A/B
-
A two component, room temperature cure patching and sealing compound. This product has excellent adhesion to plastics and various metals. CLC 16-228
-
High strength. A two part, five minute epoxy with high strength for quick repair applications. CLC 16-320
-
RT Cure, 5 Minute adhesive. Clear when cured, good for quick repairs. CLC 16-600
-
Flexible polyurethane system for potting and casting in electrical applications. A two component, low viscosity, low durometer, polyurethane potting compound. The cured material meets the requirements of UL94-V0. CLP 7106 / CLI 4010
-
A low viscosity, two component, unfilled, room temperature cure, epoxy system. This system provides resiliency and strength making it suitable for a variety of applications. ie. adhesives, castings, coatings and tooling. CLR 1180 / CLH 6020
-
Flexible epoxy casting and potting system. An unfilled, semi-flexible epoxy casting system with long pot life. This product may be used in large mass casting. CLR 1180 / CLH 6520
-
Room temp cure, Excellent shock resistance. An exceptional epoxy casting system with excellent thermal and mechanical shock resistance. CLR 1180 / CLH 6560
-
A two component, unfilled, room temperature cure epoxy, for coating, casting, and adhesive applications. CLR 1180 / CLH 6770
-
Room temp cure, excellent shock resistance. An exceptional epoxy laminating system with excellent thermal and mechanical shock resistance. Product is suitable for a variety of applications. CLR 1180 / CLH 6930
-
Shock resistant, General purpose epoxy. A two component epoxy casting system. product has low shrinkage and excellent shock resistance. CLR 1183 / CLH 6560
-
Low viscosity, RT cure. Impact resistant. Excellent thermal cycle. An exceptionally tough epoxy casting system with excellent low temperature thermal and mechanical shock resistance. CLR 1190 / CLH 6560
-
Clear low viscosity semi-flexible adhesive / sealant. A low viscosity, two component unfilled, room temperature cure epoxy system. CLR 1205 / CLH 6770
-
Extremely strong adhesive. Remains strong at elevated temperatures. A high performance, room temperature curing, 100% solids, epoxy adhesive. This product bonds to a wide variety of substrates and was specifically developed to seal porous metal substrates. CLR 1396 / CLH 6930
-
Low viscosity, RT cure. Excellent thermal shock resistance. A low viscosity adhesive with excellent thermal and mechanical shock resistance. CLR 1510 / CLH 6580
-
Heat and chemical/fuel resistant adhesive/laminating. A two component heat and chemical resistant epoxy laminating system. CLR 1730 / CLH 6372
-
UL 94-V0 system for potting and casting small electronic parts that require thermal shock and thermal cycling performance. A two component, low viscosity, room temperature cure epoxy system. Material has yellow card UL94-V0 rating, and contains non abrasive fillers suitable for meter mix dispense. CLR 1796 / CLH 6580
-
General Adhesive room temperature cure. Resistant to Toluene, Ethanol, Aviation Gas and Diesel Fuel. A low viscosity, two component, chemical resistant epoxy system. Post cured material has excellent resistance to most petroleum based fuels and solvents during exposure at ambient and elevated temperatures. CLR 3080 / CLH 6372
-
Structural Adhesive. This compound gels quickly at elevated temperatures with excellent adhesion to most substrates. A single component structural adhesive. This compound gels quickly at elevated temperatures with excellent adhesion to most substrates. CLS 9420
-
High Temperature. A single component, 100% solids, low viscosity, impregnating compound for coils and transformers. This product is also suitable for sand casting. CLS 9600